CNC Stepper Motor Driver Controller Board 3 Axis 4 Axis TB6560 Mach3 CNC Controller for DIY CNC Engraving Machine

Product Description

 

CNC Stepper Motor Driver Controller Board  3 Axis 4 Axis TB6560 Mach3 CNC Controller for DIY CNC engraving machine

Features:

 

Features:

TB6560AHQ chip – High power, maximum 3.5A drive current .

Professional design, two-stage signal processing, super anti-jamming.

1-1/16 microstep setting – Higher accuracy .

Adjustable drive current settings for each axis – 25%,50%,75%,100% of full current can be set for different stepper motors .

Overload, over-current and over-temperature safety – Full protection for your computer and peripheral equipment .

On board current switching – Power output can be set according to specific user requirement .

Relay spindle interface – Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)

4 channel inputs interface- Can be used for XYZ limit and emergency stop .

Bipolar constant current chopper drive with non-resonant region .

Full closed-type optical isolation to protect the user’s computer and equipment

Four control inputs (divided into pairs of knives) – Allows setting of limit and emergency stop.

Universal architecture – Supports most parallel software MACH3, KCAM4, EMC2 etc.

Please Note:

Please connect the power supply to the power switch of DC 12-36 V

Voltage Selection:

          > 12-16V DC power supply for Nema 17 stepper motors

          > 16-24V DC power supply for Nema 23 stepper motors

          > 24-36V DC power supply for Nema 34 stepper motors

The power output of 12V shall be applied to the radiator fan of 12V

Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.

Suitable for unipolar or bipolar stepper motors.

Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.

Package Includes:

1 x 3 Axis TB6560 Stepper Motor Driver

1 x DB25 parallel cable

1 x CD software (English Manual & Mach 3)